A 13 amp induction hob is not simply a 7000W hob with a plug fitted. The 13A supply sets a much lower input-power limit than a dedicated high-current circuit, so the appliance must manage the power delivered across its cooking zones.
How Much Power Is Available Through 13A?
At a nominal 230V supply, 13A corresponds to approximately 2,990W. That figure is the theoretical connection limit; installation conditions, continuous-load expectations, plug and cable ratings, protective devices and applicable electrical requirements must also be considered.
Why Four Zones Require Power Sharing
A four-zone hob may have a combined rated power of approximately 7,000W. When more than one zone is active, a 13A version must distribute the available input power so the configured appliance limit is not exceeded. The way that power is shared depends on the model and control logic.
| Connection | 13A UK plug, subject to installation assessment |
|---|---|
| Nominal theoretical input | Approximately 2,990W at 230V |
| Example model limit | 2,800W on the project shown in MZD's UK case study |
| Power management | Model-specific dynamic power allocation |
| Single-zone operation | Uses the available limit permitted by the selected zone |
| Multi-zone operation | Available power is shared across active zones |
| Verification | Confirm the exact model datasheet and installation requirements |
Can a 13A Hob Be Connected to a Normal Socket?
A product may be supplied with a 13A plug, but that does not remove the need to assess the socket circuit, existing load, protection, cable and installation conditions. A qualified installer should confirm the supply arrangement for the specific property and model.
13A Plug-In or Hardwired?
A plug-in model can simplify connection in suitable kitchens, while a hardwired model can support a higher configured power limit where the electrical installation is designed for it. The correct choice depends on the product specification and the available supply.
View plug-in induction hobs or discuss a UK 13A project with MZD.