Products
MZD INDUCTION HOBS
7000W Quad-zone Induction Hob with 13A UK Plug, CE & UKCA Certified (Touch Control, 9 Power Levels, Low-power Continuous Heating)
Four-zone induction hob with low-power continuous heating function. Touch control with 9 power levels, 1–99 minute timer, and child safety lock. Automatic shut-off protection included.
| Model | XDIH-628AB-CS400 |
|---|---|
| Specification | 4 cooking zones, UK 13A plug, smart power sharing |
| Size | 590 x 520 x 62 mm |
| Power | 7000W independent / 2800W combined |
| Plug / Supply | UK 13A plug; 220-230V, 50Hz |
| Certification | CE and UKCA; confirm exact model documentation |
Product Introduction
The MZD 7000W four-zone plug-in induction hob is designed for suitable UK kitchen projects that need multi-zone induction cooking without a conventional hardwired connection. The model is supplied with a UK 13A plug and uses intelligent power sharing across its four cooking zones.
For product selection, electrical planning and model comparisons, read our complete plug-in induction hob guide. Installation and circuit suitability must always be assessed by a qualified electrician.

Key Features
Four-Zone Induction Cooking
The hob provides four independent cooking zones for flexible pan placement and everyday multi-pan cooking. Touch controls provide access to nine power levels across the cooking surface.
Intelligent Power Sharing
The controller manages the combined load across active zones. Power is allocated according to the selected cooking settings, helping the hob remain within the configured 2,800W combined operating limit.
Low-Power Continuous Heating
The low-power continuous heating function supports gentle simmering and longer cooking tasks while maintaining responsive induction control.
UK 13A Plug Configuration
The model is supplied with a UK 13A plug for suitable installations. Socket condition, circuit loading, protective devices and local electrical requirements must still be confirmed before connection.
Touch Control and Safety Functions
The touch-control interface includes nine power levels, a 1–99 minute timer, child safety lock, automatic shut-off protection and pan detection functions.
7000W Independent Operation and 2800W Combined Operation
The hob uses two operating limits. During independent operation it supports a 7,000W configuration. When all four zones are used together, smart power sharing limits the combined output to 2,800W.
| Operating mode | Power | Practical meaning |
|---|---|---|
| Independent operation | 7000W | Supports the product’s independent high-power operating configuration. |
| Combined four-zone operation | 2800W | The controller shares the available output across the zones in use. |
UK 13A Plug and Electrical Requirements
The standard supply configuration is 220–230V at 50Hz with a UK 13A plug. Stored technical information also notes an E1 high-voltage warning above 260V. Always verify the final rating label and model instructions before installation.

- Confirm the condition and rating of the socket and local circuit.
- Assess existing load and protective-device requirements with a qualified electrician.
- Review how power is shared when several zones are active.
- Check the intended voltage and frequency for the destination market.
- Keep the rating label and model-specific documentation available for inspection and servicing.
For UK-specific electrical guidance, read the 13A induction hob technical guide. For an engineering example, review the UK smart power-allocation case study.
Product Specifications
| Model | XDIH-628AB-CS400 |
|---|---|
| Product type | Four-zone plug-in induction hob |
| Cooking zones | 4 |
| Independent operation | 7000W |
| Combined operation | 2800W with smart power sharing |
| Control | Touch control, nine power levels |
| Timer | 1–99 minutes |
| Panel size | 590 × 520 mm |
| Product depth | Approximately 62 mm |
| Electrical supply | 220–230V, 50Hz |
| Plug | UK 13A plug |
| Safety functions | Child lock, automatic shut-off, overheat and pan-detection functions |
| Compliance | CE and UKCA documentation for the exact model and configuration where confirmed |
The cut-out dimensions, protective-device requirements and final electrical configuration must be confirmed against the latest model drawing and rating label.
Typical UK Kitchen Applications
- Kitchen replacements where the available electrical supply is suitable.
- Compact apartment and residential kitchens using a qualified installation assessment.
- Kitchen islands where a simplified plug connection is appropriate.
- Appliance ranges for UK distributors and private-label brands.
- Projects where model-specific multi-zone power sharing is acceptable.


Installation and Project Planning
Cabinet ventilation is important for reliable operation. The installation must preserve the cooling path beneath the appliance, maintain the model-specific service clearance and provide access for inspection.
- Confirm the worktop opening and finished cabinet dimensions.
- Maintain the ventilation and service clearances shown in the installation drawing.
- Check the socket position, cable route and protective-device requirements.
- Review the electrical supply and local installation standards with a qualified electrician.
- Provide access for maintenance and future servicing.
Request the current induction hob certificates and compliance documentation for the exact model and destination market.
OEM and Private-Label Support
MZD can discuss plug type, voltage version, control configuration, market-specific power management, packaging, manuals and production planning for appliance brands and distributors.
Frequently Asked Questions
Can all four zones operate at the same time?
Yes, subject to power-sharing behaviour. The combined output is limited to 2,800W when all four zones operate together, while independent operation supports the 7,000W configuration.
Does it use a normal UK 13A plug?
The product is configured with a UK 13A plug, but the socket, local circuit and installation conditions must still be assessed by a qualified electrician.
Does the hob support low-power continuous heating?
Yes. The selected model includes low-power continuous heating for gentle cooking and simmering functions.
Can MZD provide CE and UKCA documentation?
Compliance documents apply to the exact model and configuration. Request the current documents for the intended product and destination market.
Request a Plug-In Induction Hob Quotation
Please provide the destination market, required plug and voltage, estimated quantity, installation concept and required documentation. Contact MZD to discuss the project and confirm the current product configuration.
By submitting this form, you acknowledge our Privacy Policy.