sales@mzdinductionhob.com +86 137 5113 5172

Products

7000W 4-Zone Invisible Induction Hob for Compatible Stone and Porcelain Countertops

MZD INDUCTION HOBS

7000W 4-Zone Invisible Induction Hob for Compatible Stone and Porcelain Countertops

Four-zone induction hob with split-type design and remote control. Hidden installation compatible with granite or porcelain countertops (thickness 6–15mm). 9 power levels, 1–99 minute timer, and child safety lock. Automatic shut-off protection included.

ModelIF7002S
Specification4 zones, separate touch control, compatible granite or porcelain worktops
Size590 x 520 x 62 mm; cut-out 560 x 490 mm
Power7000W
Plug / Supply220-240V, 50/60Hz
CertificationCE, LVD, EMC and RoHS documentation for exact model where confirmed

Product Introduction

The MZD 7000W 4-zone invisible induction hob is a concealed cooking system for compatible stone and porcelain worktop projects. The induction coils and heating module sit beneath the finished surface, while a separate control panel provides access to the cooking functions.

The installed result is a clean, uninterrupted worktop with no conventional raised glass cooking panel. For model comparisons, material guidance and installation planning, read the complete invisible induction hob guide.

7000W four-zone invisible induction hob installed beneath a stone kitchen island worktop

Key Features

Four-Zone Concealed Cooking

Four induction cooking zones are concealed beneath the worktop, allowing designers to create an uninterrupted cooking surface for premium kitchen islands and custom cabinetry projects.

Separate Heating and Control Modules

The split-type design separates the concealed heating assembly from the control interface. Control position, cable routing, service access and installation clearances must be coordinated before worktop fabrication.

7000W Rated Power

The model has a 7000W rated power configuration. Individual zone output, simultaneous-use limits and electrical requirements must be confirmed against the final model datasheet and approved installation drawing.

Seamless Kitchen Island Design

Concealing the heating module beneath a compatible worktop keeps the surface visually clean when the hob is not in use and helps preserve clear sightlines in open-plan kitchen layouts.

Compatible Countertop Integration

Invisible induction is not suitable for every stone or porcelain slab. Material composition, thickness, tolerances, support, thermal-shock limits, cooling and coil-to-cookware distance must be evaluated as one installed system.

OEM and ODM Project Cooperation

MZD supports appliance brands, distributors, kitchen manufacturers and countertop fabricators with product configuration, samples, technical documents, packaging and production planning for international projects.

How an Invisible Induction Hob Works

The induction heating module generates an electromagnetic field beneath the approved worktop assembly. Energy passes through the countertop and heats induction-compatible cookware placed on the marked cooking zones.

Successful operation depends on the heating module, control system, compatible cookware, verified worktop assembly, electrical supply, cooling path and service access being coordinated together.

Four-zone invisible induction heating modules installed beneath a stone worktop

For component-level detail, review how the main components work together and how invisible induction works.

Countertop Compatibility and Thickness

MZD project information references a 6–15 mm range for specific invisible induction models using compatible granite or porcelain worktops. This is not a universal compatibility rule. The exact slab, series, composition, thickness and finished assembly must be confirmed.

Fabricators should review material compatibility and validation and sintered stone countertop compatibility before cutting the worktop.

Installation, Clearance and Ventilation

Underside ventilation and cooling arrangement for a 7000W four-zone invisible induction hob
  • Confirm the approved worktop opening and module support.
  • Maintain the model-specific side, rear and underside clearances.
  • Preserve the required cooling and ventilation path.
  • Coordinate control cable routing and service access.
  • Confirm the electrical supply and protective-device requirements.
  • Review installation drawings before fabrication.

Use the installation structure and design guide, clearance and safety checklist and thermal management guidance during project planning.

Controls and Fabrication Coordination

Separate touch control panel for the MZD 7000W four-zone invisible induction hob
Split control and heating modules for the invisible induction cooking system

The control position, cable route, cut-outs, module support and maintenance access should be fixed before the countertop is finished. Request CAD drawings and technical support for the selected model.

Product Specifications

ModelIF7002S
Product type4-zone invisible / under-worktop induction system
Cooking zones4
Rated power7000W
ControlSeparate remote touch control, nine power levels
Timer1–99 minutes
Glass / worktop footprint590 × 520 mm
Product dimensions590 × 520 × 62 mm
Built-in dimensions560 × 490 mm
Electrical supply220–240V, 50/60Hz
Countertop referenceCompatible granite or porcelain, 6–15 mm for specified models; confirm exact slab and assembly
Safety functionsChild lock, automatic shut-off and model-specific protection functions

Final dimensions, power distribution, voltage version, countertop compatibility and compliance documentation must be confirmed against the selected model drawing and current datasheet.

Typical Applications

Why Work with MZD?

MZD supports international OEM and ODM projects with product configuration, sample evaluation, countertop coordination, technical documentation, packaging and production planning. Project requirements and available support are confirmed against the selected model.

Frequently Asked Questions

Is this a four-zone invisible induction system?

Yes. The model is configured around four concealed cooking zones with a 7000W rated power specification. Confirm the exact zone layout and power-sharing behaviour in the model datasheet.

Can it be installed under any stone or porcelain worktop?

No. Compatibility depends on the slab material, series, composition, thickness, thermal limits, coil distance, support and finished installation assembly. A model-specific review is required.

Does the concealed module require ventilation?

Yes, where required by the selected model. The installation must preserve the approved cooling path and clearances shown in the current technical drawing.

Can the controls be installed separately?

The split-type model uses a separate control interface. The permitted control position, cable route and installation method must be confirmed for the exact product configuration.

Can MZD review a worktop or CAD drawing?

Yes. Share the worktop material and thickness, proposed zone layout, cabinet structure, control position, destination market and estimated quantity for an initial project review.

Request an Invisible Induction Hob Review

Send the countertop material and thickness, worktop drawing, required number of zones, control arrangement, destination market and estimated quantity. Contact MZD to discuss the project and request current specifications.

Contact Form

By submitting this form, you acknowledge our Privacy Policy.

WhatsApp Email Inquiry