sales@mzdinductionhob.com +86 137 5113 5172

Products

9000W 5-Zone Invisible Induction Hob for Compatible Stone and Porcelain Countertops

MZD INDUCTION HOBS

9000W 5-Zone Invisible Induction Hob for Compatible Stone and Porcelain Countertops

Five-zone induction hob with split-type design and remote control. Hidden installation compatible with granite or porcelain countertops (thickness 6–15mm). 9 power levels, 1–99 minute timer, and child safety lock. Automatic shut-off protection included.

ModelIV9003
Specification5 zones, separate touch control, compatible granite or porcelain worktops
Size770 x 520 x 62 mm; cut-out 740 x 490 mm
Power9000W
Plug / Supply220-240V, 50/60Hz
CertificationCE, LVD, EMC and RoHS documentation for exact model where confirmed

Product Introduction

The MZD 9000W 5-zone invisible induction hob is a concealed induction cooking system for larger compatible stone and porcelain worktop projects. Five cooking zones and a separate control interface allow kitchen designers to plan flexible cooking layouts beneath an uninterrupted surface.

This model is intended for qualified OEM, ODM and kitchen projects where the worktop assembly, heating modules, control position, cooling path and electrical supply are coordinated together. Review the complete invisible induction hob guide for model and installation information.

9000W five-zone invisible induction hob installed beneath a stone kitchen island worktop

Key Features

Five-Zone Invisible Cooking

Five concealed cooking zones provide additional space for multi-pan cooking and larger kitchen island layouts while keeping the worktop visually uninterrupted.

9000W Rated Power

The 9000W rated power configuration is intended for larger multi-zone cooking requirements. Individual zone output, simultaneous-use limits and electrical requirements must be confirmed against the final model datasheet.

Split-Type Heating and Control

The heating assembly and remote control interface are arranged separately, allowing the controls to be coordinated with the island design, cable route and service access.

Large-Format Kitchen Island Design

The 770 × 520 mm cooking surface suits larger island designs where a conventional raised glass control panel would interrupt the finished worktop.

Compatible Countertop Integration

Compatibility depends on the worktop material, series, composition, thickness, thermal limits, support, cooling and approved installation assembly. A model-specific review is required before fabrication.

OEM and ODM Cooperation

MZD supports appliance brands, distributors, kitchen manufacturers and countertop fabricators with product configuration, samples, technical documents, packaging and project-specific production planning.

Five-Zone Layout and Project Planning

A five-zone cooking surface requires more planning than simply choosing a larger appliance. The zone layout must fit the available island length, leave sufficient worktop space around the cooking area and allow the concealed modules to sit within a supported cabinet structure.

The remote control interface also needs to be positioned where it is straightforward to operate without compromising cable routing, drawer space risk or maintenance access. Before fabrication, the designer should coordinate the heating modules, control panel, sink and appliance clearances, substrate and finished countertop assembly.

Share the proposed island dimensions and cabinet layout during the initial project review. This allows the team to identify whether the selected five-zone format is suitable before the worktop is cut or the cabinet structure is finalised.

How a Five-Zone Invisible Induction Hob Works

Induction coils beneath the compatible worktop generate electromagnetic fields that heat induction-ready cookware placed on the marked cooking zones.

The heating modules, control electronics, cookware, countertop assembly, ventilation and service access operate as one installed system.

Five-zone invisible induction heating modules installed beneath a stone worktop

For component-level information, read how the main components work together and how invisible induction works.

Countertop Compatibility and Thickness

MZD project information references a 6–15 mm range for specified invisible induction models using compatible granite or porcelain worktops. This is not a universal rule: the exact slab, series, thickness, support, thermal limits and finished assembly must be validated.

Fabricators should review material compatibility and validation and sintered stone countertop compatibility before worktop fabrication.

Installation, Clearance and Ventilation

Underside ventilation and cooling arrangement for a 9000W five-zone invisible induction hob
  • Confirm the model-specific worktop opening and module support.
  • Maintain the required rear, side and underside clearances.
  • Provide the approved cooling and ventilation path.
  • Coordinate the remote control position and cable routing.
  • Check the electrical supply and protective-device requirements.
  • Preserve access for maintenance and servicing.

Use the installation structure and design guide, clearance and safety checklist and thermal management guidance during project planning.

Controls and Fabrication Coordination

Separate touch control panel for the MZD 9000W five-zone invisible induction hob
Split control and heating modules for the five-zone invisible induction system

The control location, cable route, cut-outs, support and service access must be fixed before the countertop is finished. Request CAD drawings and technical support for the selected model.

Product Specifications

ModelIV9003
Product type5-zone invisible / under-worktop induction system
Cooking zones5
Rated power9000W
ControlSeparate remote touch control, nine power levels
Timer1–99 minutes
Glass dimensions770 × 520 mm
Product dimensions770 × 520 × 62 mm
Built-in dimensions740 × 490 mm
Electrical supply220–240V, 50/60Hz
Countertop referenceCompatible granite or porcelain, 6–15 mm for specified models; confirm exact slab and assembly
Safety functionsChild lock, automatic shut-off, overheat, residual-heat, overflow and pan-detection functions

Final dimensions, power distribution, voltage version, countertop compatibility and compliance documentation must be confirmed against the approved model drawing and current datasheet.

Documentation and Compliance

Project documentation should cover the exact appliance model, voltage version, control configuration and destination market. Review the available induction hob certificates and compliance records and request current technical drawings before approving samples or mass production.

For commercial projects, the final specification should identify the model code, rated power, worktop assembly, control arrangement, packaging configuration and documents required by the customer or importer. Any special configuration should be recorded in the quotation or project approval documents.

Typical Applications

Why Work with MZD?

MZD supports international OEM and ODM projects with product configuration, sample evaluation, countertop coordination, technical documentation, packaging and production planning. Available support is confirmed against the selected model and project requirements.

Frequently Asked Questions

Is this a five-zone invisible induction system?

Yes. The model is configured with five concealed cooking zones and a 9000W rated power specification. Confirm the exact zone layout and power distribution in the model datasheet.

What size worktop area does the hob require?

The catalog references a 770 × 520 mm glass footprint and 740 × 490 mm built-in dimensions. Final cut-out and support details must be confirmed against the approved technical drawing.

Can it be installed under any stone worktop?

No. Compatibility depends on the slab material, composition, thickness, thermal limits, coil distance, support and finished installation assembly.

Does the concealed module require ventilation?

Yes, where required by the selected model. The installation must preserve the approved cooling path and clearances.

Can the control panel be positioned separately?

The split-type system uses a separate remote control interface. Permitted positions, cable routing and installation requirements must be confirmed for the exact configuration.

Request a 9000W Invisible Induction Hob Review

Provide the worktop material and thickness, island dimensions, required cooking-zone layout, control position, destination market and estimated quantity. Contact MZD to request the current specification and drawing package.

Contact Form

By submitting this form, you acknowledge our Privacy Policy.

WhatsApp Email Inquiry